Scales (rev002)

Entering Bootloader

1. Turn off power to your modular system.
2. Connect a USB cable from the rear of the module to your computer.
3. Hold down the LOAD button on the front panel and turn on power to your modular system.

Changelog

1.0.4 (2023-12-20)

• Fixed possible wrapping outputs when pitch exceeded 10V.

1.03 (2023-04-27)

• Increased TRIG output time to ~5ms (from ~2.5ms) for the sequencer.
• Initial release of rev002.

1.01 (2019-07-26)

• When recording a sequence, holding a key down will keep the TRIG output high. This does not affect tied notes or rests in your sequence.
  Note: Makes it a nice little keyboard when paired with an ASR/ADSR.
• Fixed: When A>Trig or No trig setting is selected, Tied notes now hold the gate high when advancing the sequence. Formerly only happened when B>Trig was enabled.

1.00 (2019-1-15)

• Initial release.