Sealegs
- Turn off power to your modular system.
- Connect a USB cable from the rear of the module to your computer.
- Hold down the BOOT button on the rear of the module and turn on power to your modular system.
1.3.5.0 (2026-07-24)
- Tweaks: Improvements to Synced Delay Timing.
- Fixed: Glitches in DIGI when time is at the shorted, and mod depth is high.
1.3.1.0 (2025-11-24)
- Tweaks: Hiss is now stereo and a bit more chill; Crackle is less dense.
- New: Drive stage is brighter sounding by default.
- New: The original darker drive available by holding SYNC-MOD on boot; LEDs will light up Blue for "Dark", Cyan for "Bright".
1.2.2.0 (2025-04-15)
- Fixed: Mod would reset to W&F on boot, it now matches knob position on boot.
1.2.1.0
- Minor bug fixes and tuning.
1.2.0.0
- Tweaks: Gain Staging updates — This update reduces the attenuation on signals passing through Sealegs; as a
result, the MIX (wet/dry) control is much more balanced and the overall output of the module is
louder, matching closer to your input. Adjust your mixes accordingly.
- Tweak: Wider "Detent" for setting input trim to 1x (Noon).
- New: Send/Return Mode (Hold DELAY SYNC on boot) —
- A special mode intended to be used on an Aux Send from a mixer.
- DRY signal is NOT passed through.
- MIX controls the WET level only.
1.1.1.0
- Tweak: Tighter timing when frozen in all 3 models, both synced and unsynced.
- Other: Minor tweaks and tuning.
1.1.0.0
- Tweak: Freeze is now "clickless" on all modes.
- Notes about freeze:
Tape and BBD emulate an analog style freeze (ie. cutting the input to delay and locking feedback at
100%), they will both absorb modulation and time changes into the frozen audio.
Specifically in BBD mode, you may find accumulating signal/frequency loss when freezing by nature of
emulating an analog BBD with limited sample rate, especially at longer times.
Tape mode will hold its audio level much better, while slowly saturating as a tape delay would.
Digital mode actually freezes the audio buffer, and will maintain it's contents indefinitely, and
will not be modified by modulation or time changes.
- New: Flexible Drive Signal Path —
- Hold ALT and Move the FOG POS switch to set.
- Setting will be saved across reboots.
- See updated manual for full details on the new routing options.
- IN = Original Drive Functionality. (Default)
- DLY = Drive is bypassed on the Dry signal, and only passed into the Delay.
- MIX = Drive is end-of-chain POST MIX.
- Other: Misc tweaks and tuning.
- Updated manual available at intellijel.com/support.
1.0.0.4/5