µMIDI 1U

Entering Bootloader

1. Turn off power to your modular system.
2. Disconnect all cables, including patch cables and DIN MIDI cables from the µMIDI.
3. Connect a USB cable from the µMIDI module to your computer.
4. Hold down the LEARN button on the module and turn on power to your modular system.

Changelog

1.15 (2017-05-11)

• Fix some settings not saving.

1.14 (2016-09-22)

• Add option to disable clock outputs when sequencer is not running.
• Allow option for CC output to respond to channel aftertouch.

1.13 (2016-06-22)

• Fix USB communication problem on some Windows machines.

1.12 (2016-06-06)

• Fix stuck gate when using last note priority.

1.11 (2016-05-25)

• Ability to set coarse and fine tuning via RPN messages. The new default tuning is -24 so that 0V corresponds to C0 in Ableton Live.
• Send reset signal slightly before clock
• Fix saving of settings
• Compatibility with the new online configuration utility

1.00 (2015-12-04)

• Initial release.